XY-4-5 engineering core drilling rig
1. After replacing the rotator of the XY-4 drilling rig, it can be restored as a core drill.
2. Replace the 6 pole motor and add a hydraulic module, which can be used for the construction technology of swirl spraying and deep mixing.
3. Different configuration tower, drilling tool and pump are suitable for hydrological well process.
Scope of application:
Xy-4-5 drilling rig is a construction drill with mechanical transmission and hydraulic feed, which is mainly used in construction, port, dam, bridge, urban overpass, basic engineering, etc., and small diameter filling pile drilling.
1. Drilling ability
When the aperture is 300mm, the hole depth is 200 ~ 500m;
When the aperture is 500mm, the hole depth is 50 ~ 100m;
When the aperture is 1000mm, the hole depth is 20 ~ 50m.
Speed :(forward) 18;184.108.40.206;105;150;218;(reverse) 15;47 r/min
Maximum output torque: 12800 NM.
Vertical stroke: 600mm.
Shaft diameter: 95 mm.
Maximum pressure: 54 kN.
Maximum lift force: 72 kN.
Lifting speed: 0.82;1.53;2.16;3.13 m/s
Lifting capacity: 30 kN.
Diameter of wire rope: 15.5mm.
Capacity: 70 m
4. Frame: slide stroke of up and down frame: 720 mm.
The maximum distance from the hole center is 500 mm.
Type: human word
Height: 10 m
Hook weight: 180 kN.
6. Power (selected by users)
Motor: y225s-437kw, or y200l-622kw.
Diesel engine: ZH4100P, 40kW, 2000r/min.
Main frame (length x width x height) : 3220 (3940) x 1200 * 1900 (2500) mm.
Overall shape (length x width x height) : 5000 x 2660 x 10530 mm.
Host weight: < 3 t.
Machine weight: approximately 6 t.